Replacing the 12611801,0280142479,214-1685,3163-1164200 carbon canister solenoid valve has become a question for most people. It is an important operation to maintain the vehicle's fuel system and environmental performance. As for how to replace it, we will give you the answer next.

First of all, before replacing, we need to turn off the car and wait for the engine to cool down completely, and we also need to disconnect the negative electrode of the battery. Do and confirm the exact position of the carbon can solenoid valve. It will generally be near the fuel tank, next to the throttle, or at the bottom of the engine compartment.

Then find the carbon canister solenoid valve and look at the connection pipeline and fixing components; gently unplug the clip or connector of the connection pipeline, remember to fix it with your hands, otherwise it may cause flashing or damage. Then loosen the fixing clip or plug, separate the electrical connection of the solenoid valve, use a wrench or corresponding tool to loosen the bolts/nuts, and remove the old solenoid valve. If carbon particles are found to accumulate during the disassembly, you can wipe it with alcohol to clean it to keep the installation environment of the new components clean.

Finally, start the installation. First, place the new solenoid valve in its original position, confirm the direction, and then use the tool to tighten the bolts/nuts. Pay attention to avoid heavy damage to the parts or excessive looseness, causing air leakage. Then reconnect all pipelines and electrical connectors. Be sure to check whether there is looseness and confirm that there is no leakage in all interfaces. Then reconnect the negative electrode of the battery and check whether the engine is faulty.